Zirconium

Product Details:

Zirconium 99.2%. The purity listed includes the Hafnium content. Do NOT expose to concentrated Sulphuric Acid containing ferric or cupric ions, or to mixtures of hydrochloric & nitric acids, or to ferric chloride, or to copper chloride solutions as a pyrophoric film may be produced. Treating in hot air or steam for 20 to 60 minutes @ 250C can eliminate the pyrophoric film.[5:42 pm, 23/09/2019] Bhavesh Job Tomorrow: Zirconium is a hard, lustrous, silvery coloured metal which is extracted from its ores (the oxide or zircon, ZrSiO4) by conversion to the tetrahalide followed by reduction with magnesium. The metal is extremely corrosion resistant due to the formation of a stable oxide film and is unaffected by acids (with the exception of HF) and alkalis.
As a result of its corrosion resistance, zirconium is widely used in the chemical industry where corrosive agents are used. Also, due to its excellent high temperature properties, coupled with its low neutron absorption, it is used in the construction of nuclear reactors. The pure metal is also used as a lining in jet engines. Zirconium is used as an alloying element, the resultant alloys having improved mechanical properties.
Zirconium oxide, zirconia (ZrO2), is used as an opacifier in vitreous enamels as well as a pigment. However, the main applications of zirconia make use of its excellent strength and high temperature properties, and it is used to manufacture foundry crucibles, bricks, ceramics and abrasives. It has sufficient strength to enable it to be used to fabricate high precision knife blades.
The chemical properties of zirconium are very similar to those of hafnium. As a result, the normal chemical processes used for the extraction of zirconium will not remove hafnium, which can be present in commercial grades of zirconium at levels as high as 4.5%. A high purity grade of zirconium containing less than 0.01% hafnium is used for nuclear applications.

Additional Information:

Delivery Time: Ready Stocks

Packaging Details: Wooden Box

Additional Information:

• Delivery Time: Ready Stocks
• Packaging Details: Wooden Box

Product Details:

Zirconium is a very strong, malleable, ductile, lustrous silver-gray metal. Its chemical and physical properties are similar to those of titanium. Zirconium is extremely resistant to heat and corrosion. Zirconium is lighter than steel and its hardness is similar to copper. When it is finely divided, the metal can spontaneously ignite in air, especially at high temperatures. Zirconium powder is black and is regarded as very dangerous fire hazard. Zirconium does not dissolve in acids and alkalis.

Additional Information:

Delivery Time: Ready Stocks

Packaging Details: Wooden Box

Additional Information:

• Delivery Time: Ready Stocks
• Packaging Details: Wooden Box

Product Details:

Due to various excellent performance of the alumina ceramics under wide range of industrial or working conditions, solid ceramic rod / bar / shaft  7mm 8mm 9mm 10mmare mainly used in the area of thermal processes, protecting tubes, insulating tubes, furnace tubes, radiant tubes, support tubes for electric heaters, b eams,profiles, incineration aids and special fabrication

Additional Information:

Delivery Time: Ready Stocks

Packaging Details: Wooden Box

Additional Information:

• Delivery Time: Ready Stocks
• Packaging Details: Wooden Box

Product Details:

Zirconium is a hard, lustrous, silvery coloured metal which is extracted from its ores (the oxide or zircon, ZrSiO4) by conversion to the tetrahalide followed by reduction with magnesium. The metal is extremely corrosion resistant due to the formation of a stable oxide film and is unaffected by acids (with the exception of HF) and alkalis.
As a result of its corrosion resistance, zirconium is widely used in the chemical industry where corrosive agents are used. Also, due to its excellent high temperature properties, coupled with its low neutron absorption, it is used in the construction of nuclear reactors. The pure metal is also used as a lining in jet engines. Zirconium is used as an alloying element, the resultant alloys having improved mechanical properties.
Zirconium oxide, zirconia (ZrO2), is used as an opacifier in vitreous enamels as well as a pigment. However, the main applications of zirconia make use of its excellent strength and high temperature properties, and it is used to manufacture foundry crucibles, bricks, ceramics and abrasives. It has sufficient strength to enable it to be used to fabricate high precision knife blades.
The chemical properties of zirconium are very similar to those of hafnium. As a result, the normal chemical processes used for the extraction of zirconium will not remove hafnium, which can be present in commercial grades of zirconium at levels as high as 4.5%. A high purity grade of zirconium containing less than 0.01Widely used in aerospace, military industry, nuclear reaction and atomic energy.% hafnium is used for nuclear applications.

Additional Information:

Delivery Time: Ready Stock

Packaging Details: Wooden Box

Additional Information:

• Delivery Time: Ready Stocks
• Packaging Details: Wooden Box